A chimney needs more than a quick patch
Five repair routes
We can repoint, weatherproof, repair structurally or rebuild where the stack demands it.
Leaks traced around the stack
Flashing, masonry and top details are checked together to find the real entry point.
Ventilation kept in mind
We resolve faults without blindly sealing areas that still need to breathe.
Do not ignore crumbling joints above the roofline
A chimney stack takes a fair battering from weather, and once the mortar starts to break down the trouble rarely stays tidy. Loose masonry, water entry around the stack, internal damp and visible movement all point to a chimney that needs attention. We carry out chimney rebuilds, structural fixes, weatherproofing, leak prevention and repointing, depending on what the stack actually needs. With Trade Right Paving & Roofing Ltd, we check the chimney masonry, flashing and exposed top details together, because a leak near the stack is often a shared problem rather than one obvious crack waving for attention.
Repoint where possible, rebuild where needed
If the main issue is defective mortar, we remove the failed joints and renew them to restore stability and weather resistance. If the stack has deeper movement or damaged masonry, more extensive structural work may be the safer answer. We also keep ventilation in mind, because blocking up the wrong area can create another problem while you are trying to solve the first one. With Trade Right Paving & Roofing Ltd, you get straight advice on whether the chimney needs repointing, repair or a more substantial rebuild.
Frequently asked questions
What signs show a chimney needs repair?
Crumbling mortar, loose bricks, damp around the chimney breast, water getting in near the stack and visible leaning or instability are all warning signs. Left alone, these problems can lead to more masonry loss and repeated leaks into the roof area.
What happens during chimney repointing?
We rake out the defective mortar joints and replace them with fresh mortar to restore the bond between the bricks. That helps improve weather resistance and stability, provided the chimney structure itself is still sound enough for repointing to be the right remedy.
Can chimney leaks come from flashing rather than the bricks?
Yes, quite often. Water around a chimney can be caused by failed flashing, weakened mortar, damaged top details or a mix of the lot. We inspect the full area around the stack so the repair tackles the real cause rather than the most obvious stain.